Terminal Tackle

Kwik Change Weights provide the angler with a multitude of balancing and weighting options. Available in four popular, practical sizes to cover a variety of uses. The weights are attached simply by stretching a piece of the rubber tube and placing into the slot. This forms a totally secure fixture that will not damage the line.

Kwik Change Weights provide the angler with a multitude of balancing and weighting options. Available in four popular, practical sizes to cover a variety of uses. The weights are attached simply by stretching a piece of the rubber tube and placing into the slot. This forms a totally secure fixture that will not damage the line.

Constructed from the same materials as the extremely popular Dark Matter Tubing but with a thinner outer diameter and a smaller bore, making the Nano version perfect for long distance casting. Nano Tubing is 30% thinner than the original version, making it more supple, whilst reducing drag when casting. As per its bigger brother, the Nano version is impregnated with tungsten granules, helping it mould to the contours of the lakebed. With its smaller bore, Nano Tubing can be used with line up to 0.40mm diameter and available in three versions: weed, gravel and silt. Supplied in packs of 2m. To compliment the Nano Tubing a Dark Matter Nano Tail Rubber is also available, with smaller bore and slimmer profile to match the characteristics of the tubing.

Nano Tail Rubbers are specifically designed to work with the Dark Matter Nano Tubing.

ESP Helicopter Rig Sleeves

Designed to pin down hooklinks and mainlines, these extra heavy streamlined sinkers are soft and flexible and easy to slide onto mono where they will hold in place or onto coated braid without damaging the coating. Supplied on wires attached to a high-vis fob. Available in Small (12 sinkers) and Large (10 sinkers)

They are are available in three sizes, Mini, Standard and Long, and each Bait Screw is mounted on a Large Covert Rig Ring with a 3mm I/D. Using them in this way increases the free movement of hook baits and helps the hook to react immediately when the bait is inhaled, ensuring that the rig you have combined them with is free to work to its greatest potential.

They are are available in three sizes, Mini, Standard and Long, and each Bait Screw is mounted on a Large Covert Rig Ring with a 3mm I/D. Using them in this way increases the free movement of hook baits and helps the hook to react immediately when the bait is inhaled, ensuring that the rig you have combined them with is free to work to its greatest potential.

They are are available in three sizes, Mini, Standard and Long, and each Bait Screw is mounted on a Large Covert Rig Ring with a 3mm I/D. Using them in this way increases the free movement of hook baits and helps the hook to react immediately when the bait is inhaled, ensuring that the rig you have combined them with is free to work to its greatest potential.

Changing your hookbait has never been simpler, thanks to our Bait Screw Swivel which allows it to be done in seconds, and it compatible with many of the most popular rigs. They can be used on any rig as a substitute for a ring or micro ring swivel, including the spinner rig and IQ D-rig. They can be used with both bottom baits and pop-ups, and are simply screwed into the bait in a clockwise direction, and have the surface area to ensure that the boilie stays on during the cast. There is a choice of medium or large versions. You get five per packet.

The ability to quick change (QC) any rig is a massive time saver and we’ve been doing it with standard rigs for years. However, due the short length of stiff material used to construct a Chod Rig, until the krimps came along it was always a very fiddly and frustrating knot to tie; particularly on very short chods. Krimping our Mouth Trap Chod Filament has become an increasingly popular way to create a QC Chod by utilising our standard 0.6mm krimps normally associated with our popular Boom material when creating Spinner Rigs.

The ability to quick change (QC) any rig is a massive time saver and we’ve been doing it with standard rigs for years. However, due the short length of stiff material used to construct a Chod Rig, until the krimps came along it was always a very fiddly and frustrating knot to tie; particularly on very short chods. Krimping our Mouth Trap Chod Filament has become an increasingly popular way to create a QC Chod by utilising our standard 0.6mm krimps normally associated with our popular Boom material when creating Spinner Rigs.

Super secure high grip hook beads designed to prevent any slippage when you’re casting your baits and rigs to maximum range. Featuring a clever tapered design with an increased surface are keeping the maximum amount of contact with the hook. These medium versions are prefect for use with Korda’s medium micro ring swivels, as well as the medium bait screw.

The perfect product to use when fishing a lead clip “naked” i.e. when not using rig tubing or leadcore. Primarily designed for use with zig rigs when using a lead clip, these “naked” tail rubbers will help avoid tangles associated with this type of fishing. There is no need to use anti tangle tubing as the rig is nearly always going to be longer than the tubing.

This Shrink Tube can be used to finish off rigs and increase their hooking potential by curving the hook link inwards, thus helping the hook to flip over once in the carp’s mouth. There are number of rigs which utilise Shrink Tube, with the line aligner being one of the most common. It is stiff enough that it will maintain its shape, but once a fish is hooked it will straighten so that no damage is done – unlike with an actual bent hook.

They grip on a range of sizes from 4s to 10s and act as an ideal stop for ESP Micro and Mini Rig Rings and Hook Ring Swivels.