Terminal Tackle

Covers the lead on Chod and Helicopter rigs. Colour matched to blend in on all lakebeds. Compatible with size 8 swivels. Can also be used with Avid Speed Links Perfect for covering the lead on your helicopter and Chod rigs. They are also useful as a buffer bead for a highly effective running rig. Can also be used for marker float setups.

•25 units per packet •Available in camouflaged translucent weed green and gravel brown •Extra long versions of the E-S-P Streamliner Rig Sleeves with 3 prime functions: 1.Masking and protecting the knot 2.Acting as a stiff boom to prevent tangles during casting 3.Laying the hooklink out away from the lead for optimum bolt rig efficiency

These little rubber hook beads fit tightly onto the shank of all of our hook pattes, and can be used to create a number of effective presentations. They’re perfect for use with rig rings, to create blow-back rigs such as the Withy Pool rig, or even variations of the all-conquering chod rig. They come supplied on easy-to use sprews, which each old 20 hook beads. The beads are weedy green colour, which helps them blend over most lake beds.

•3 to 1 maximum available shrink ratio •Matt translucent finish •Quantity: 8 Rigs •Lengths: 7cm

Quick and easy rig changes are a necessary part of carp angling today. The Link Loop has been specially designed to replace the need for an overhand loop in the end of your hook link. The obvious advantage is the increased strength due to the use of a grinner or blood knot used to tie the link loop to the rig, especially when using monofilament or coated hook link materials.

From bait attachment, to combi-rig construction, the Micro Rig Swivel has a host of rig applications. It's perhaps most widely used sliding on the shank of a hook, forming the blow-back element of many rigs. Crucially, it has the same non-reflective coating that our other rig components are blessed with, eliminating any glint that might otherwise spook feeding fish.

These clever swivels have been designed to make chod-rig fishing even easier. They feature a rounded crook rather than a conventional eye, into which you can clip a looped chod. To create the loop, you can either tie an overhand loop or crimp a loop into the end. These loops can then be 'clicked' into the loop and won't come out unless you want to change a rig. The swivels are PTFE coated, which prevents light glinting off, potentially spooking feeding carp. Supplied in packs of 8.

Zig Magnet - A little device to make tangles history when zig fishing! - Screws into all banksticks - Magnetic plate holds hook on the cast, to stop it catching or tangling - Korda green finish!

These little gems were designed to prevent tangles on the cast, and help to kick your hook bait away from the lead once the rig lands on the lake bed, giving excellent presentation.

Korda Krimps The final launch in our big-hitting trio of new releases is the long-awaited Krimp Tool. We’ve been fielding questions about the release date for what seems like years but the big day is now very close. The clever system will allow us all to reach brand-new heights of neatness in rig creation! The Krimps and Krimp tool have been designed to allow easy rig construction with stiff materials. In particular we’re really excited about the potential to create extremely neat loops for chod rigs. Not only this but using Krimps will allow you to create chod rigs that are exactly the same length each and every time. There are two sizes of Krimp available which have been designed to suit different materials. The smaller one will suit normal stiff materials and stiff coated braids like our Hybrid Stiff and the larger one is perfect for really thick materials (like 30lb plus mono).

Korda Krimps The final launch in our big-hitting trio of new releases is the long-awaited Krimp Tool. We’ve been fielding questions about the release date for what seems like years but the big day is now very close. The clever system will allow us all to reach brand-new heights of neatness in rig creation! The Krimps and Krimp tool have been designed to allow easy rig construction with stiff materials. In particular we’re really excited about the potential to create extremely neat loops for chod rigs. Not only this but using Krimps will allow you to create chod rigs that are exactly the same length each and every time. There are two sizes of Krimp available which have been designed to suit different materials. The smaller one will suit normal stiff materials and stiff coated braids like our Hybrid Stiff and the larger one is perfect for really thick materials (like 30lb plus mono).

Kamo Rig Tube Not only does rig tubing stop the hook link from wrapping around the main line on the cast preventing a tangle, it also stops the fish coming in contact with the line during the fight. This is a vital safety aspect of the rig which we feel should not be ignored. Danny has actually seen a carp roll on the line as it was being played and watched as scales fluttered down to the lake bed. When the carp was landed it had several white marks where the scales used to be. This was from a method feeder where no tubing was required because the hook link was squashed inside the method ball so it couldn't tangle. But, for the sake of having some tubing on, which if you use it right doesn't have to spook the carp, you will ensure the fish stay as perfect as the moment they made the mistake of wanting your hook bait!

Size 8 Swivel The humble swivel completes the whole rig set up and since it is almost the last connection between you and the carp it needs to be reliable. We always bought swivels from the same source, until our suppliers’ supplier merged with a new company. The stocks were mixed and some were not as good quality so we immediately set about sourcing an alternative.

Chod Swivels - Size-11 ring swivels that have been re-engineered for chod fishing - A recessed barrel to allow counterbalance putty to grip - PTFE coated - Free turning to allow optimum rig function These size-eleven ring swivels have been subtly re-engineered to allow for putty to be securely moulded around the barrel. We’d noticed that most anglers used our size-11 ring swivels when making chod rigs, or the hook section of a hinged stiff rig. The team set about designing a swivel that would provide more purchase for the putty counterweight. These little beauties are the result…

No-Trace Beads - Spare beads that fit onto our Chod Sleeves - Super-safe thanks to a unique slot in the bead - Supplied in packs of 25 - Subtle green colour Spare No-Trace beads for the Chod Safety Systems. These beads are key to making the systems the safest rotary-rig ever made.

Streamliner Rig Sleeves The streamlined shape of the Rig Sleeves offers knot protection, reduces tangles and helps lay the hooklink out away from the lead.

Designed for any rig that incorporates a sliding ring on the hook shank, ESP Shank Stops are housed on a handy frame that can be stored neatly in the tackle box. No more problems trying to extract a tiny stop from a flip top box! The frame contains 40 stops, 20 of each mini and small. The mini stops are perfect for hook sizes 8 and 10 whilst the small are best suited to larger hooks.

Silicone Tubing - 1.5m packs of soft silicone tubing - Has a multitude of rig uses - Available in 0.5mm bore and 0.75mm bore - Muddy Brown and Weedy Green versions available Korda Silicone Tubing is perfect for holding the hair in place on the hook, stopping tangles and helping the hook to catch hold more efficiently!

Silicone Sleeves - Our original silicone sleeves - Muddy brown and weed green colours - Perfect for sliding over Kwik Links - Can be cut to size In 2003 we released the increasingly popular Run Rig kits, after this we received a massive demand for the silicone sleeves to be sold separately. We found that by using a small piece to cover the swivel on the lead it kept everything neat and tidy but more importantly offered much better camouflage. They are also the perfect size to fit over our Kwik-links and Stik-Klip.

Line Saver Bead - Ultra-safe No-Trace setup for use with helicopter rigs - Allows a fish to ditch a leadcore leader if it is cracked off or cut off - Supplied with Barrel Beads, No-Trace Beads and Chod Sleeves - The safest rotary rig system ever invented

Spinner Swivel The spinner swivel is purposely designed to create the ultimate Spinner rig/Ronnie rig. A wider clip allows the hook to be quickly change without the need to open or close the wire.Use this swivel with a medium kicker or shrink tube to cover the connection and keep the hook sitting at the correct angle. Recommended to use with a Krank or Kurv hook pattern.

Naked Chod Safety System - Ultra-safe No-Trace setup for use with the naked chod - Allows the fish to free itself from the line if rig is cut off or cracked off - Supplied with Barrel Beads, No-Trace Beads and tungsten-impregnated Chod Sleeves - Beads supplied on easy-to-use sprews

Leadcore Chod Safety System - Ultra-safe No-Trace setup for use with helicopter rigs - Allows a fish to ditch a leadcore leader if it is cracked off or cut off - Supplied with Barrel Beads, No-Trace Beads and Chod Sleeves - The safest rotary rig system ever invented