Carp

Ideal for all Carp, Pike and Specialist Rigs.

The rubber bead is designed to house the top ring and barrel of the swivel and leave the bottom ring protruding and free to rotate. Using a five-turn grinner knot in the following reel lines, the knot will fit neatly inside the bead.

These Standard Uni-Link Swivels also improve the presentation of lighter, more flexible mono and soft braided hook links, effectively reducing tangles on the cast. They come in packets of 10 and are available in sizes 9, 10 and 11 to fit all popular safety clips and in line leads.

The Korda Size 8 PTFE COATED RING SWIVEL has been designed to create a strong hinge when using Chod or Hinged Stiff Rigs. The PTFE (Polytetrafluoroethylene) coating is a synthetic polymer which has one of the lowest coefficients of friction of any solid. This makes it the perfect coating for our swivels as it reduces friction between the barrel and swivel eye, allowing them to rotate freely which reduces tangles.

These Quick Change Beads are precision made from high-quality English tooling so that the two components have a nice consistent fit. The outer bead is semi-flexible and grips in place securely over the internal connector. This connector has a small recess above the central hole to accommodate the barrel of the knot, which is formed when attaching the reel line. The internal unit has an average breaking strain of 20lb (9kg). Rather than an obtrusive black, Quick Change Beads come in much more discrete green and camo colours.

They are produced in a super slick, hard grade polymer that slides beautifully on monofilament, the clip link is easy to open and is masked by exactly the right length of silicone tube to prevent tangles. The three sizes are designed to work perfectly with Swivel Stop Beads and Quick Change Beads. Run Rings offer a free running setup perfect for fishing targeting a variety of species such as barbel, chub, carp, bream, tench and even perch and eels. Each pack comes with four green and four brown Run Rings and are available in three sizes ranging from small to large.

ESP Quick Change Uni Link, Perfect for the highly effective 'Ronnie Rig', the slight opening in the crook makes it easy to attach the hook and the smooth rotation provides 360-degree movement. The two different sizes can be tailored to different sized hooks and baits to create a perfectly balanced presentation. These swivels can also be used on a helicopter rig where the crook allows quick change of a looped hooklink and the large ring provides a safe set up. Matt black finish.

The Multi Rig is a superbly versatile rig, which allows the hook to be changed in a flash. They are most often used as pop-up rigs, but can be used with bottom baits too! They are constructed from Kamo coated braid, which has an effective banded came pattern to help it blend in over all sorts of lake beds.

The Multi Rig is a superbly versatile rig, which allows the hook to be changed in a flash. They are most often used as pop-up rigs, but can be used with bottom baits too! They are constructed from Kamo coated braid, which has an effective banded came pattern to help it blend in over all sorts of lake beds.

The Multi Rig is a superbly versatile rig, which allows the hook to be changed in a flash. They are most often used as pop-up rigs, but can be used with bottom baits too! They are constructed from Kamo coated braid, which has an effective banded came pattern to help it blend in over all sorts of lake beds.

The Korda Size 11 PTFE COATED SPINNER RING SWIVEL has been purposefully designed for creating the popular Spinner/Ronnie Rig. It uses a Polytetrafluoroethylene (PTFE) coating which is a synthetic polymer and has one of the lowest coefficients of friction of any solid. This makes it the perfect coating for our swivels as it reduces friction between the barrel and swivel eye, allowing them to rotate freely, this in turn will improve the hooking efficiency of your Spinner Rig Having the most efficient rotation will increase your rigs mechanics and help them to perform at their optimum level. The PTFE COATED SPINNER RING SWIVELS will be added to our range of end tackle and will not replace our existing SPINNER RING SWIVELS

These quick-change Drennan Method Connectors allow you to quickly change feeders and hooklengths. They are designed to go with the Drennan In-Line Flat Method Feeders and Pellet Feeders but they are also suitable for lots of other uses where a quick change connection is required. They provide an easy loop-to-loop, slimline join which locates neatly back inside the body of an inline feeder. The rubber sleeve semi locks into a central position for security and the internal moulding has a breaking strain of approximately 36lb (16kg), making it an extra-strong connection method.

This special ESP blend of PVA string has an extra loose weave which allows water to penetrate between the filaments ensuring rapid meltdown without residue. These strands can be further separated into finer lengths for even faster dispersal. To cover all requirements this PVA string is available in 3 Ply which is best suited to short range and very low water temperatures. 6 Ply which is a good, all-round string for varying water temperatures capable of supporting 3-4 baits for casting up to 70 yards. And finally, 9 Ply which is extremely strong and is perfect for fishing at distance with very heavy stringers.

An essential piece of kit for any carp angler and their presentations, and in a smooth matte black, non-reflective finish to match the rest of your tackle! Used to attach hookbaits on chods, D-Rigs & Multi types too or for any setup where they are running on the hook shank such as a blowback, Ronnie etc. Smooth matt black finish. 20 per pack

The Korda Size 8 and Size 11 PTFE COATED QC RING SWIVELS have been designed to allow anglers to quickly change hook lengths whilst maintaining a strong and reliable connection. The QC, or Quick Change, element has become a firm favourite with Team Korda and allows the rig to be changed and re-cast in a minimal amount of time… capitalising on fish feeding on your spot. HINT: Cover the connection with an anti-tangle sleeve. The PTFE (Polytetrafluoroethylene) coating is a synthetic polymer which has one of the lowest coefficients of friction of any solid. This makes it the perfect coating for our swivels as it reduces friction between the barrel and swivel eye, allowing them to rotate freely which reduces tangles.

One ring Provides the all-important flexible hinge for the hooklink while the other, the attachment for the leadcore leader. These setups are particularly effective when stalking carp in weedy margins as the swivel easily pulls out to its housing allowing the lead to fall away.

Ideal for sealing PVA Bags and keeping boilies nicely spread apart on stringers, it is also useful for tying long hairs to the hook to prevent them from tangling on the cast.

Fits perfectly over a Korda Kwik Link to stop tangles, perfect compliment to the Kamo Leader.

These metal Bait Screws are strong enough to screw into hard baits and are ideal for D-rigs and 'Ronnie' rigs. The added benefit to using bait screws is that hookbaits can be changed within seconds. They come in packs of ten and have a matt black finish.

Tungsten Loaded Tube is significantly heavier than leadcore and is exceptionally supple, so it follows lake-bed contours, keeps the last few feet of mainline protected and anchors it hard to the bottom. The 0.65mm internal bore is easy to thread, even accepting tapered leaders and the outside diameter is a good fit for a variety of tail rubbers and rig sleeves.

Consisting of : 5 Lead clips, 5 Rubbers, 5 Size 8 swivels, Korda rig tube has a 0.75mm bore, it has a smooth matt finish making it easy to thread. Available in- - Silt - Weed Green - Gravel - Clay

ESP Bait Screw Plastic, These plastic Bait Screws are moulded in a tough, lightweight polymer and are ideal for pop-ups and wafters. The added benefit to using bait screws is that hookbaits can be changed within seconds.